0

Out of 0 Ratings

Owner's of the Canon Camera Flash Canon Speedlite Flash gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
Page 58
of 372
 
55
Wireless Settings
The color of the <D> lamp changes depending on the transmission
status of the master unit and the slave unit.
You can set whether or not to fire, as a wireless flash, the master unit
that controls the slave unit. When master flash firing is set to ON, the
master unit is fired as firing group A.
1
Set the <N> display.
Press function button 4 to display
<N>.
2
Set the master flash firing.
Press function button 1 <4> to
set the master flash firing to ON or
OFF.
g
: Master flash firing ON
d
: Master flash firing OFF
About the <D> Lamp
Color Status Description Action
Green Lit
Transmission
OK
Red
Lit
Not connected Check the channel and ID
Blinking
Too many units
Master units + slave units =
16 units or less
Error Turn the power off and on again
Master Flash Firing ON/OFF
If the transmission channels of the master unit and slave unit are
different, the slave unit does not fire. Set both to the same number, or set
both to “AUTO”.
If the wireless radio IDs of the master unit and slave unit are different, the
slave unit does not fire.
COPY
56
Wireless Settings
You can save the wireless settings in the master unit and slave unit, and
recall the settings later. Operate the master unit or slave unit separately
depending on which unit’s settings are to be saved or recalled.
1
Press function button 4.
On the master unit, press function
button 4 to display <P>.
On the slave unit, press function
button 4 to display <O>.
2
Save or load the settings.
Press function button 3 <L>.
[Save]
Press function button 1 <V>.
X The settings are saved (stored in the
memory).
[Load]
Press function button 2 <J>.
X The settings that were saved are set.
About the Memory Function
COPY
57
This section describes basic fully
automatic wireless shooting when using
a 600EX-RT attached to the camera
(master) and a 600EX-RT wirelessly
controlled (slave).
1
Set the master unit.
Set the 600EX-RT attached to the
camera as the master unit (p.52).
You can also use a Speedlite
Transmitter ST-E3-RT (sold
separately) as the master unit.
2
Set the slave unit.
Set the 600EX-RT to be controlled
wirelessly as the slave unit (p.52).
Set A, B or C as the firing group. The
flash will not fire if it is set to D or E.
3
Check the channel and ID.
If the channels and IDs of the master
unit and slave unit are different, set
them to the same numbers (p.53, 54).
4
Position the camera and the
flash.
Position them within the range shown
on page 48.
a
: Fully Automatic Wireless Flash Shooting
Autoflash Shooting Using One Slave Unit
COPY
null
  • Add more products to collection
  • Add more products to collection
  • Add more products to collection
  • Add more products to collection
  • Add more products to collection
  • Add more products to collection
  • Add more products to collection
-

Find a Product