2.4
Owner's of the Canon Camcorder Canon VIXIA HF-R40 8GB Flash Memory Camcorder gave it a score of 2.4 out of 5. Here's how the scores stacked up:
168 Additional Information
Do not disconnect the power source. Do not disconnect the USB cable unless you first use
the computer to safely end the connection.
- When the camcorder is in mode and is connected to the computer with the supplied
USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source
while this message appears may result in permanent loss of the recordings in the camcorder.
Use the computer’s Safely Remove Hardware function to end the connection and disconnect
the USB cable before using the camcorder.
- To transfer files to the camcorder, power the camcorder using the compact power adapter and
only then connect it to the computer using the supplied USB cable.
File name error
- The folder and file numbers have reached their maximum value. Set > q> [File
Numbering] to [Reset] and delete all the MP4 movies (A 57) and photos (A 58) on the
memory card or initialize it (A 33).
Initialize only using the camcorder
- There is a problem with the file system that prevents accessing the selected memory. Initialize
the memory with this camcorder (A 33).
LCD Screen has been dimmed Use the [LCD Backlight] setting to change the brightness
- Change the > > [LCD Backlight] setting to [Normal] or [Bright].
May not be possible to record movies on this memory card
- You may not be able to record movies on a memory card without a Speed Class rating or with
one rated SD Speed Class 2. Replace the memory card with one rated SD Speed Class 4, 6 or
10.
Mem. Card Number of scenes already at maximum
- The memory card already contains the maximum number of AVCHD scenes (3,999 scenes);
no further scenes can be copied onto the memory card. Delete some scenes (A 56) to free
some space.
Mem. Card Unable to recognize the data
- The memory card contains scenes recorded using a video configuration that is not supported
(PAL or SECAM). Play back the recordings in the memory card with the device originally used
to record them.
Memory card cover is open
- After inserting a memory card, close the memory card slot cover.
Memory card is full
- The memory card is full. Delete some recordings (A 56, 58) to free some space or replace
the memory card.
Memory card is write-protected
- The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi-
tion of the LOCK switch.
COPY
Find Your Products By Category
Please Login
