Care and cleaning
• Always make sure that the Juice Fountain is
switched off at the power outlet. Then remove the
plug from the power outlet before cleaning,
disassembling and storing the appliance.
• Follow these instructions to clean all surfaces of
parts that come into contact with food during
• For easy cleaning – immediately after each use
always switch off at power outlet and then unplug.
Then rinse removable parts under running water
(to remove wet pulp). Allow parts to air dry.
• After disassembling the unit all removable parts
may be washed in hot soapy water or dishwasher
safe parts may be placed in the dishwasher.
• The Juice Fountain cover, integrated pulp container,
stainless steel filter basket and 800ml juice jug are
dishwasher safe, (top shelf only).
• Wipe the motor base with a damp cloth.
• For consistent juicing results always make sure that
the stainless steel filter basket is thoroughly
cleaned using the supplied nylon bristle brush.
Using the nylon washing brush, hold the stainless
steel filter basket under running water and brush
from the inside of the basket, hold it up towards a
light to ensure the fine mesh holes are not blocked.
If the holes are blocked soak the stainless steel
filter basket in hot water with 10% lemon juice to
loosen the blocked holes. Alternatively wash the
stainless steel filter basket in the dishwasher.
• Do not soak the stainless steel filter basket in bleach.
• Always treat the stainless steel filter basket with
care as it can be easily damaged.
• Discoloration of the plastic may occur with strongly
colored fruit and vegetables. To help prevent this,
wash parts immediately after use.
• If discoloration does occur, the plastic parts can be
soaked in 10% lemon juice and water or they can
be cleaned with a non- abrasive cleaner.
To assist with cleaning, soak the stainless steel
filter basket in hot soapy water for approximately
10 minutes immediately after juicing is
completed. If pulp is left to dry on the filter it
may clog the fine pores of the filter mesh
thereby lessening the effectiveness of the Juicer.
For your convenience a nylon cleaning brush has
been included with your Juice Fountain.
Disassembling your Breville Juice Fountain continued
Remove the food pusher by lifting it vertically.
Remove the juicer cover from the integrated pulp
container by lifting it vertically. Remove any pulp
from the cover by using the flat end of the brush to
gently scrape down the sides.
Remove the stainless steel filter basket by lifting it
vertically from the pulp bowl container.
Empty the pulp from the integrated pulp container
into a side bowl for composting or into the bin.
Use the flat end of the brush to gently scrape down
inside the pulp container.
THE STAINLESS STEEL FILTER BASKET CONTAINS SMALL SHARP BLADES TO CUT AND PROCESS
FRUITS AND VEGETABLES. DO NOT TOUCH BLADES WHEN HANDLING THE FILTER BASKET.
DO NOT IMMERSE THE MOTOR BASE IN WATER OR ANY OTHER LIQUID. DO NOT USE WATER
JET TO CLEAN THE MOTOR BASE.
THE CENTER OF THE FILTER BASKET AND FEED CHUTE CONTAIN SMALL SHARP BLADES TO
PROCESS FRUIT AND VE
TABLES DURING THE JUICING FUNCTION. DO NOT TOUCH BLADES
WHEN HANDLING THE FILTER BASKET OR FEED CHUTE.