Out of 1 Ratings

Owner's of the Sony Camera Flash HVL-F58AM gave it a score of 4.0 out of 5. Here's how the scores stacked up:
  • Reliability

    5.0 out of 5
  • Durability

    4.0 out of 5
  • Maintenance

    5.0 out of 5
  • Performance

    5.0 out of 5
  • Ease of Use

    1.0 out of 5
of 88
Changing the custom setting
This is an explanation of how to change each custom setting is given below.
To set the high-speed sync (C01)
You can set the high-speed sync.
Press the f or F button to select [ON].
The display switches between [ON] and [OFF].
This flash unit is set to high-speed sync automatically when the shutter speed is
set faster than flash sync speed. Flash sync speed may differ depending on the
camera. For further details of flash sync speed, refer to operating instructions
supplied with your camera.
Taking photos in bright locations is recommended.
High-speed sync cannot be used with bounce flash.
Using a flash meter or color meter with high-speed sync is not recommended
because it interferes with achieving the proper exposure and color.
The flash range becomes shorter than that of normal flash photography when the
high speed sync is used. Make sure that the subject is in the flash range.
You can also use the high speed sync with when using wireless flash
If you select [OFF], high-speed sync is cancelled. When high-speed sync is
cancelled, the shutter speed cannot be set faster than the sync speed.
To change the channel setting of the wireless flash (C02)
You can change the wireless channel to prevent interference when another flash is
used nearby.
Press the f or F button to select the desired setting.
The display is changed in the following order.
[CH-1] y [CH-2] y [CH-3] y [CH-4] y . . .
Attach the flash unit to the camera and press the shutter button partway down
after changing the channel.