Breville Coffeemaker BDC600XL User Manual

4.1

Out of 36 Ratings

Owner's of the Breville Coffeemaker BDC600XL gave it a score of 4.1 out of 5. Here's how the scores stacked up:

  • Reliability

    4.08 out of 5

  • Durability

    4.11 out of 5

  • Maintenance

    3.97 out of 5

  • Performance

    4.22 out of 5

  • Ease of Use

    4.22 out of 5
of 72
 
13
BEFORE FIRST USE
BEFORE FIRST USE
• Before using the YouBrew™ for the first
time, ensure you have unpacked all
parts and accessories before removing
and safely discarding all packaging
material and promotional labels. Ensure
the power cord is unplugged from the
power outlet.
• Wipe the exterior stainless steel
housing with a soft, damp cloth. Wash
the bean hopper and lid, coffee basket,
gold tone filter and carafe in warm,
soapy water and a soft cloth. Do not
use abrasive cleansers, pads or cloths
which can scratch the surface. Rinse
and dry thoroughly.
INITIAL SET UP
1. Install the Bean Hopper
Position the hopper onto the machine.
Turn the locking knob clockwise in the
direction of the LOCK arrow until it
clicks. Fill the hopper with fresh beans.
We recommend always keeping the hopper
full (0.5lb maximum) to ensure there are
sufficient beans. However, never over-pack
the hopper as this may result in the grinder
jamming. Replace the hopper lid.
NOTE
For easy removal, storage and
transfer of beans, the hopper can be
removed by turning the locking knob
counter-clockwise in the direction
of the UNLOCK arrow. If you have
removed the hopper, ensure it is
securely reassembled back onto
the machine. The safety interlock
system will prevent operation if the
hopper is incorrectly assembled. The
LCD screen will flash ‘LOCK BEAN
HOPPER’ until the issue is resolved.
2. Plug in the Power Cord
Unwind the power cord completely and
insert the power plug into a grounded
110-120V power outlet. Press the POWER
button. The LCD screen will illuminate.
NOTE
The coffee machine will enter POWER
SAVE mode after remaining idle for
10 minutes. Press the POWER button
to exit POWER SAVE mode and
re-start the machine.
3. Install the Coffee Basket
For best results, we recommend pre-heating
the coffee basket by running it under
hot tap water. Ensure to dry the coffee
basket thoroughly, taking particular care
to completely dry the chute area. Line the
coffee basket with either the provided gold
tone filter or a paper filter. Never use both
at the same time.
a) Provided gold tone filter. When using
the gold tone filter, be sure that the
handle is positioned towards the hinge
area of the coffee basket. If you do not,
the handle may interfere with the flow of
ground coffee into the gold tone filter.
HANDLE TOWARDS
COFFEE BASKET HINGE
ENSURE CHUTE
AREA IS
COMPLETELY DRY
NOTE
The gold tone filter will allow some
fine coffee grounds to fall into the
coffee. This will appear as sediment in
the cup or carafe. This is normal.
Only use the gold tone filter provided
as others may cause the machine to
overflow.
BDC600XL_IB_B11.indd 13 25/05/11 1:34 PM

   Find Your Products By Category