Breville Coffeemaker BDC600XL User Manual

4.1

Out of 36 Ratings

Owner's of the Breville Coffeemaker BDC600XL gave it a score of 4.1 out of 5. Here's how the scores stacked up:

  • Reliability

    4.08 out of 5

  • Durability

    4.11 out of 5

  • Maintenance

    3.97 out of 5

  • Performance

    4.22 out of 5

  • Ease of Use

    4.22 out of 5
of 72
 
26
CARE & CLEANING
4. Press the POWER button to turn the
machine off and remove the plug
from the power outlet.
5. Remove any beans that remain in the
grinding chamber and around the
upper burr.
6. Remove the upper burr by turning
the handle clockwise.
R
E
L
E
A
S
E
L
O
C
K
7. Using the provided cleaning brush,
thoroughly remove any build-up
of coffee grinds that have formed
around the grinding burrs and
coffee grinds chute. Ensure the
grinds catcher is in place to catch
the loose grinds.
CLEAN THE
GRINDING
BURRS
CLEAN THE
COFFEE
GRINDS CHUTE
8. Wipe the coffee grinds chute disc
(the entire stainless steel part)
to remove any build-up of coffee
grinds that have accumulated on
the surface. Dry thoroughly.
9. Replace the upper burr by aligning
the three notches around the upper
burr with the three notches in the
grinding chamber. The upper burr
should sit flush. Turn the handle
counter-clockwise until it clicks
into position.
10. Replace the bean hopper and lock
into position.
11. Replace the coffee basket onto the
swing-out door and close. The coffee
grinds chute will rotate back to the
closed position. You may hear a
winding noise, this is normal.
12. The LCD screen will no longer
display ‘CLEAN COFFEE CHUTE’.
The machine is now ready to use.
CLEANING THE GRINDS CATCHER
AND DRIP TRAY
Press the OPEN button to open the
swing-out door. Remove the grinds
catcher located under the coffee grinds
chute and the 2-part drip tray at the base
of the machine. Wash in warm, soapy water.
Do not use abrasive cleansers, pads or cloths
which can scratch the surface. Rinse and
dry thoroughly.
CLEANING THE OUTER HOUSING
The outer housing and LCD screen can
be cleaned with a soft, damp cloth. Apply
cleanser to the cloth and not the LCD
surface. Polish with a soft, dry cloth.
Cleaning and drying with dry paper towels
or abrasive cloths and cleaners may scratch
the surface.
BDC600XL_IB_B11.indd 26 25/05/11 1:34 PM

   Find Your Products By Category