0
Owner's of the Canon Camcorder Canon VIXIA HFR42 32GB Flash Memory Camcorder gave it a score of 0 out of 5. Here's how the scores stacked up:
Additional Information 159
- If you are using a battery pack recommended by Canon for use with this camcorder, there
may be a problem with the camcorder or battery pack. Consult a Canon Service Center.
A noise can be heard from the compact power adapter.
- A faint sound can be heard while the compact power adapter is connected to a power outlet.
This is not a malfunction.
The battery pack is exhausted extremely quickly even at normal temperatures.
- The battery may have reached the end of its battery life. Buy a new battery pack.
Recording
Pressing Y will not start recording.
- You cannot record while the camcorder is writing previous recordings onto the memory (while
the ACCESS indicator is on or flashing). Wait until the camcorder has finished.
- The memory is full or it already contains the maximum number of scenes of AVCHD movies
(3,999 scenes). Delete some recordings (A 56, 58) or initialize the memory (A 33) to free
some space.
- The file numbers for MP4 movies and photos have reached their maximum value. Set
>q>[File Numbering] to [Reset] and insert a new memory card.
The point where Y was pressed does not match the beginning/end of the
recording.
- There is a slight interval between pressing Y and the actual start/end of record-
ing. This is not a malfunction.
The camcorder will not focus.
- Autofocus does not work on the subject. Focus manually (A 80).
- The lens is dirty. Clean the lens with a soft lens-cleaning cloth (A 179). Never use tissue
paper to clean the lens.
When a subject flits across in front of the lens, the image appears slightly bent.
- This is a phenomenon typical of CMOS image sensors. When a subject crosses very quickly in
front of the camcorder, the image may seem slightly warped. This is not a malfunction.
Changing the operating mode between recording (Ü)/record pause (Û)/playback (Ð)
takes longer than usual.
- When the memory contains a large number of scenes, some operations may take longer than
usual. Save your recordings (A 111) and initialize the memory (A 33).
Movies or photos cannot be recorded properly.
- This may occur as movies and photos are recorded/deleted over time. Save your recordings
(A 111) and initialize the memory using the [Complete Initialization] option (A 33).
Cannot record a photo while recording movies.
- You cannot take photos in mode or while fading in or fading out a scene (A 78).
COPY
Find Your Products By Category
Please Login
