Onkyo CD Player DX-C390 User Manual

0

Out of 0 Ratings

Owner's of the Onkyo CD Player DX-C390 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 31
 
13
Connecting the DX-C390—Continued
With (Remote Interactive) you can control the
DX-C390 together with your other -compatible
Onkyo AV components. With some Onkyo AV receivers
you can use one remote controller to control all your
Onkyo components and use the following special
functions:
■ Auto Power On
If your DX-C390 is connected to an -compatible
Onkyo AV receiver, when you turn on the DX-C390, the
AV receiver will turn on and select the DX-C390 as the
input source.
■ Direct Change
If your DX-C390 is connected to an -compatible
Onkyo AV receiver, when you start playback on the
DX-C390, the AV receiver will select the DX-C390 as
the input source.
■ Auto Power Off
When you set an -compatible Onkyo AV receiver to
Standby, all other AV components connected via
enter Standby as well.
■ Dimmer
When you dim the display brightness on an -compat-
ible Onkyo AV component, the displays on all other AV
components connected via are dimmed as well.
To use the functions, you need to connect one of the
DX-C390’s connectors to an connector on
another AV component in your system by using the sup-
plied cable.
See the manuals supplied with your other -compati-
ble AV components for more information.
Notes:
• Use only cables for connections.
• To use you must make an analog RCA/phono
connection between your DX-C390 and Onkyo AV
receiver even if they are connected digitally.
• The DX-C390 has two connectors. You can con-
nect either one to your Onkyo AV receiver. The other
connector is for connecting additional -compatible
components.
• Connect the DX-C390’s connector to only Onkyo
AV components. Connecting to other manufacturer’s
AV components may cause them to malfunction.
• Some Onkyo -compatible AV components may
not support the special functions described here.
Connections
RCA/phono audio connecting cable
cable
Hi-fi amp, AV receiver
CD
RL
To use you must make an analog audio connection (RCA/phono)
between the DX-C390 and your other Onkyo equipment even if they are
connected digitally.
Disconnect the power
cord before making any
connections!
Coaxial IN
Coaxial cable (not supplied)

   Find Your Products By Category