Out of 2 Ratings

Owner's of the Canon Camera Flash Speedlite gave it a score of 3.8 out of 5. Here's how the scores stacked up:
  • Reliability

    4.0 out of 5
  • Durability

    3.5 out of 5
  • Maintenance

    4.0 out of 5
  • Performance

    4.0 out of 5
  • Ease of Use

    3.5 out of 5
of 122
With multiple Canon Speedlites having the wireless flash feature, you can
create various lighting effects with the same ease as using normal E-TTL II
The settings you input with the master unit attached to the camera are
also automatically transmitted to the slave units which are controlled by
the master unit via wireless. Therefore, you need not operate the slave
unit(s) at all during the shoot.
For details on wireless flash photography and operating the master unit,
see the master unit’s instruction manual. The procedure below applies to a
master unit attached to the camera and slave unit(s) controlled by wireless.
Set the master unit.
Attach the master unit Speedlite to
the camera and set it as necessary.
Set the 430EX II as the slave unit.
Hold down the <G>
button for 2 sec. or more.
Check the communication
If the master unit and slave unit(s) are
set to a different channel, set them all
to the same channel (p.29).
Set the slave ID.
Set the slave ID when using two (A
and B) or three (A, B, and C) slave
groups (p.30).
Position the camera and
Position the slave unit(s) within the
master unit’s wireless transmission
Wireless Flash
A81_03.fm Page 26 Tuesday, February 5, 2008 2:33 PM