3.8

Out of 2 Ratings

Owner's of the Canon Camera Flash Speedlite gave it a score of 3.8 out of 5. Here's how the scores stacked up:
  • Reliability

    4.0 out of 5
  • Durability

    3.5 out of 5
  • Maintenance

    4.0 out of 5
  • Performance

    4.0 out of 5
  • Ease of Use

    3.5 out of 5
of 122
 
29
Flash exposure compensation and other settings set with the master
unit will also be automatically set in the slave units. Thus, you need not
operate the slave unit(s). Wireless flash with the following settings can
be done in the same way as with normal flash shooting.
• Flash exposure compensation • FEB
• High-speed sync (FP flash) • Manual flash
• FE lock • Stroboscopic flash
If there is another Canon wireless flash system nearby, you can change
the channel No. to prevent signal confusion. Both the master and slave
units must be set to the same channel No.
1
Press the <G> button
so that <w> blinks.
2
Set the channel No.
Press the <9> button to select the
channel number, then press the
<8> button.
Using Fully Automatic Wireless Flash
Setting the Communication Channel
With FE lock, if even one Speedlite will result in underexposure, the <Q>
icon will blink in the viewfinder. Open the aperture more or move the
slave unit closer to the subject.
With a wireless flash system, the master unit’s settings will not be
displayed on the 430EX II’s LCD panel.
A81_03.fm Page 29 Tuesday, February 5, 2008 2:33 PM
COPY