Marantz Car Stereo System AV Pre Tuner User Manual

0

Out of 0 Ratings

Owner's of the Marantz Car Stereo System AV Pre Tuner gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 186
 
100
Playback in ZONE2/ZONE3 (Separate room)
•You can operate this unit so as to enjoy audio in a room (ZONE2, ZONE3) other than the MAIN ZONE
(room where the unit is located).
•You can simultaneously play back the same source in both the MAIN ZONE, ZONE2 and ZONE3. You can
also play back separate sources in the MAIN ZONE, ZONE2 and ZONE3.
•When a TV is connected to the HDMI ZONE2 OUT connector, you can play back a video or audio from the
device connected to the HDMI 1 – 6 IN connector in ZONE2 (HDMI ZONE2 function).
The source selected for ZONE2 is also output from the recording output connectors (MEDIA PLAYER).
NOTE
The following restrictions apply to the HDMI ZONE2 function.
•If you select a same input source for MAIN ZONE and ZONE2, audio playback may be restricted or video
may be interrupted.
•Video may not be output depending on the resolution of the TV used for MAIN ZONE and ZONE2. In this
case, use your player to set the resolution of the TV.
•The HDMI audio signals for the input source selected in ZONE2 are not output from the ZONE2 speakers.
•When HDMI ZONE2 function is used, you cannot set the following.
•Picture Adjust •Video Conversion •Aspect Ratio
•Auto Lip Sync •i/p Scaler •Setup menu display
•Video Mode •Progressive Mode
Audio output
It is possible to play 2-channel audio in rooms other than the MAIN ZONE where multi-channel playback is
done. Choose one of the methods.
•Zone playback by audio output (PRE OUT)
Use an external amplifier.
Zone playback by audio output (PRE OUT)
n Audio connections (ZONE2, ZONE3)
The audio signals of this unit’s ZONE2 and ZONE3 audio output terminals are output to the ZONE2 and
ZONE3 amplifiers and played on these amplifiers.
AUX IN AUX IN
R
L
R
L
MAIN ZONE
ZONE2 ZONE3
This unit
Power
amplifiers
Power
amplifiers
We recommend using high quality pin-plug cables for audio connections in order to prevent noise.
NOTE
In ZONE2 or ZONE3, the digital audio signals input from the HDMI, COAXIAL or OPTICAL connector
cannot be played back. When playing back in ZONE2 or ZONE3, make an analog connection.
Basic version
Advanced version
Information
Advanced version
DVD

   Find Your Products By Category