Breville Boiler BES900XL User Manual

0

Out of 0 Ratings

Owner's of the Breville Boiler BES900XL gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 40
 
14 15
2 CUP BUTTON
Press 2 CUP button once to extract
a double shot of espresso at the pre-
programmed volume (approx. 2oz / 60ml).
The extraction will start using the low
pressure pre-infusion.
The machine will stop after 2 CUP volume
has been extracted and will return to
STANDBY mode.
MANUAL BUTTON
The MANUAL button allows you to
control the espresso pour volume to suit
your preference.
Press MANUAL button once to start the
espresso extraction. The extraction will
start using the low pressure pre-infusion.
Press MANUAL button again to
stop extraction.
NOTE
To stop an extraction at any time,
press the 1 CUP, 2 CUP or MANUAL
button and the machine will return to
STANDBY mode.
NOTE
To reprogram the 1 CUP or 2 CUP
pour volume to suit your preference,
refer to ‘Shot Volume’, page 16.
STEAM
For instant steam, move STEAM LEVER
to OPEN position. The STEAM LED will
illuminate.
To turn steam off, move STEAM LEVER to
CLOSED position. The machine will return
to STANDBY mode.
CAUTION: BURN HAZARD
Pressurized steam can still be released,
even after machine has been switched off.
Children must always be supervised.
HOT WATER
For instant hot water, rotate the HOT
WATER dial to OPEN position. The HOT
WATER LED will be On.
To turn hot water off, rotate the HOT
WATER dial to CLOSED position. The
machine will return to STANDBY mode.
NOTE
The HOT WATER dial will cease to
dispense hot water after approx.
30 seconds. Depending on the size of
your cup, you may need to close, then
re-open the HOT WATER dial. See
‘HOT WATER LED Flashing’, page 21.
NOTE
You cannot run hot water and extract
espresso at the same time.
LCD PROGRAMMING FUNCTIONS
To program the machine, press MENU
button once. The LCD will display all
programming functions. Continue to
press MENU button until the function
you’d like to program is flashing.
At any stage during programming, press
EXIT to return to STANDBY mode.
NOTE
The MENU button is disabled during
an extraction pour, or when the
STEAM LEVER or HOT WATER dial
are OPEN.
OPERATING YOUR BREVILLE DUAL BOILER™OPERATING YOUR BREVILLE DUAL BOILER™

   Find Your Products By Category