Breville Mixer STAND User Manual

4.3

Out of 3 Ratings

Owner's of the Breville Mixer STAND gave it a score of 4.3 out of 5. Here's how the scores stacked up:

  • Reliability

    4.67 out of 5

  • Durability

    4.67 out of 5

  • Maintenance

    3.67 out of 5

  • Performance

    4.33 out of 5

  • Ease of Use

    4.33 out of 5
of 88
 
14
Attaching the Scraper Beater, Flat
Beater, Wire Whip or Dough Hook
1. Ensure the power cord is unplugged
and the Speed Control Dial is in the
'OFF' position.
2. Press the 'Tilt-Release' button and
simultaneously use the Lift Assist
Handle to raise the mixer head until it
locks into the open position.
3. Locate the groove at the top of the
attachment.
4. Align the groove with the pin on the
Attachment Shaft.
5. Push upwards as far as possible
and turn counter-clockwise until the
attachment securely locks onto the pin.
6. Press the 'Tilt-Release' button and
simultaneously use the Lift Assist
Handle to lower the mixer head until it
locks into the closed position.
BEFORE FIRST USE
Removing the Scraper Beater, Flat
Beater, Wire Whip or Dough Hook
1. Ensure the power cord is unplugged
and the Speed Control Dial is in the
'OFF' position.
2. Press the 'Tilt-Release' button and
simultaneously use the Lift Assist
Handle to raise the mixer head until it
locks into the open position.
3. Push the attachment upwards as far
as possible and turn clockwise until the
attachment releases from the pin on the
Attachment Shaft.
4. Pull attachment from Attachment Shaft.
BEM800XL_IB_v10.indd 14 19/11/09 3:16 PM

   Find Your Products By Category