Marantz Car Stereo System AV Pre Tuner User Manual

0

Out of 0 Ratings

Owner's of the Marantz Car Stereo System AV Pre Tuner gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 186
 
102
Playback
1
Press ZONE SELECT to switch
“ZONE2” or “ZONE3”.
Input source
select buttons
2
Press ON/STANDBY X to turn
on the ZONE2 or ZONE3 power.
•Also press input source select button when
in standby mode, the power turns on.
•When ON/STANDBY X is pressed, ZONE2
or ZONE3 turns off.
•Power in ZONE2 or ZONE3 can be turned
on or off by pressing ZONE2 ON/OFF or
ZONE3 ON/OFF on the main unit.
3
Press the input source select
button to select the input source
to be played.
The audio signal of the selected source
is output to ZONE2 or ZONE3.
When power for both MAIN ZONE and ZONE2 is set to ON, power of
the MAIN ZONE only can be turned off. In Step 1, press ZONE SELECT
to select “MAIN” and then press ON/STANDBY X.
Adjusting the volume
Use VOLUME df to adjust the volume.
GAdjustable rangeH
0 – 40 – 98
(When the “Scale” (vpage112) setting is “0 – 98”)
GAdjustable rangeH
– – –
–79dB – –40dB – 18dB
(When the “Scale” (vpage112) setting is “–79.5dB – 18.0dB”)
•At time of purchase, “Volume Limit” (vpage135) is set to “70
(–10dB)”.
Turn VOLUME after pressing ZONE SELECT on the main unit to adjust
the sound volume.
Turning off the sound temporarily
Press MUTE :.
The sound is reduced to the level set at “Mute Level” (vpage135)
in the menu.
•To cancel, either adjust the volume or press MUTE : again.
•The setting can also be cancelled by adjusting the volume or turning
off the ZONE2 or ZONE3 power.
You can adjust the tone and volume for ZONE2 or ZONE3 in “ZONE2
Setup” or “ZONE3 Setup” (vpage135) in the menu.
Sleep timer function
•This is convenient for viewing and listening while going to sleep in
ZONE2 or ZONE3.
•The sleep timer function can be set by zone.
1
Press ZONE SELECT to switch
“ZONE2” or “ZONE3”.
2
Press SLEEP and display the time
you want to set.
•If SLLEP on the main unit is pressed,
the same function as with the remote
control unit can be obtained.
•The time switches as shown below each time SLEEP is pressed.
Off 10 min 20 30 40 50
6080 7090100
110
120
To confirm the countdown time before putting the
unit to sleep
Press SLEEP.
“Z2 Sleep : zmin” or “Z3 Sleep : zmin” appears on the display.
z Countdown time
To cancel the sleep timer
Press SLEEP to set “Off”.
The sleep timer is also cancelled when this unit is set to the standby
mode or the ZONE2 or ZONE3 power is turned off.
NOTE
The sleep timer function cannot turn off the power of devices
connected to this unit. To turn off the power of those connected
devices, set up sleep timers on the connected devices themselves.
Basic version
Advanced version
Information
Advanced version
DVD

   Find Your Products By Category