0
Owner's of the Marantz Car Stereo System AV Pre Tuner gave it a score of 0 out of 5. Here's how the scores stacked up:
170
Symptom Cause/Solution Page
When the HDMI
ZONE2 function is
used, no video or
audio is output to TV
in ZONE2.
•Make sure that the power is on for ZONE2.
•Check the input source for ZONE2.
•Check the output settings (resolution/audio format) for the input
device
102
102
–
When playing back
the input device just
to use the HDMI
ZONE2 function, the
TV used for MAIN
ZONE is turned on.
•“HDMI Control” in the menu is set to “On”. When using the
HDMI ZONE2 function, set “HDMI Control” in the menu to “Off”.
92, 117
GVideoH
Symptom Cause/Solution Page
No picture appears. •Check the connection between the video output terminal of this
unit and the input terminal of the TV.
•Match the input settings to the input terminal of the TV connected
to this unit.
10, 14
–
GAudioH
Symptom Cause/Solution Page
Audio is not output. •Check the connections for all devices.
•Check the speaker connections and configurations.
•Check the connections for PRE OUT terminals.
•Check whether the audio device power is turned on.
•Adjust the master volume.
•Cancel the mute mode.
•Check the connection with the playback device and select the
proper input source.
•Match the input mode and the terminal assigned to be the digital
input terminal.
•Disconnect the headphones. No sound is output from the PRE
OUT terminals when headphones are connected.
10,11,14,15,
16,17,18,19,
20,21,22,23,
24,25,26,27
26,86,87
26,86,87
–
37, 102
37, 102
36, 102
124
150
The volume does not
increase.
•The maximum volume is set too low. Set the maximum volume
using “Limit” on the menu.
•Power for external devices connected to the output connectors
of the unit may not be turned on. Check the power of connected
external devices.
112
–
No sound is
produced from
surround speaker.
•Check if the surround speakers are connected to the SURROUND
terminals of Power Amplifire.
–
No sound is
produced from
surround back
speaker.
•Set “Speaker Config.” – “Surr. Back” on the menu to something
other than “None”.
•Set the sound mode to something other than “STEREO” and
“VIRTUAL”.
128
77
No sound is
produced from front
height speaker.
•Set “Speaker Config.” – “Front Height” on the menu to something
other than “None”.
128
No sound is
produced from front
wide speaker.
•Set “Speaker Config.” – “Front Wide” on the menu to something
other than “None”.
128
Basic version
Advanced version
InformationInformation
v See overleaf
DVD
Find Your Products By Category
Please Login
