Nikon Automobile Electronics SB-910 User Manual

0

Out of 0 Ratings

Owner's of the Nikon Automobile Electronics SB-910 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 136
 
B–6
B
Operation
This section covers basic procedures in i-TTL mode in combination with a CLS-
compatible camera.
v Notes on continuous fl ash photography
To prevent the SB-910 from overheating, allow it to cool down for at least •
10 minutes after 15 times of continuous firing.
When continuous flash firing is repeated in quick succession, the internal safety •
function adjusts the recycling time by up to 15 seconds. If flash firing continues,
the thermal cut-out indicator appears on the LCD and all operations except
power ON/OFF and custom settings are suspended. (0E-23) Allow it to cool
down for several minutes to disable this function.
The conditions under which the internal safety function is activated differ •
depending on the temperature and the SB-910 flash output level.
For use with High-performance Battery Pack SD-9 (optional), see “Using High-•
performance Battery Pack SD-9.” (0H-11)
STEP
1
Inserting the batteries
Slide the battery chamber cover
open while pressing the battery
chamber cover lock release.
Insert the batteries following the
[+] and [−] marks.
Close the battery chamber cover.
Basic Operations

   Find Your Products By Category