0

Out of 0 Ratings

Owner's of the Nikon Automobile Electronics SB-910 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 136
 
B–7
B
Operation
Basic Operations
Compatible batteries and replacement/recharging
When replacing batteries, use four fresh AA-size batteries of the same brand. Refer
to the following table to determine when to replace batteries with fresh ones or
recharge batteries according to how long the ash-ready indicator takes to come
on.
Battery type
Time the ash-ready indicator takes to
come on
1.5 V LR6 (AA-size) alkaline battery 20 seconds or more
1.5 V FR6 (AA-size) lithium battery 10 seconds or more
1.2 V HR6 (AA-size) rechargeable Ni-MH
battery
10 seconds or more
For minimum recycling time and number of flashes for each battery type, refer to
“Specifications.” (0H-21)
Alkaline battery performance may vary greatly depending on the manufacturer.
1.5 V R6 (AA-size) carbon-zinc batteries are not recommended.
Using an optional external power source increases the number of flashes and
provides shorter recycling times. (0H-11)
v Additional precautions regarding batteries
Read and follow battery warnings and cautions ( 0A-14 – A-18).
Be sure to read and follow the warnings for the battery on the section, “Notes on
Batteries” (0H-7), before using the battery.
The recycling time can be longer when FR6 (AA-size) lithium batteries are used
because they incorporate a function that suppresses the output current when
heat is generated in the batteries.