0

Out of 0 Ratings

Owner's of the Nikon Automobile Electronics SB-910 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 136
 
E–17
E
Functions
Flash Photography Support Functions
Flash compensation
Exposure compensation for a ash-illuminated subject without affecting
background exposure can be achieved by adjusting the SB-910’s ash output level.
Some plus compensation may be necessary to make the main subject brighter,
and some minus compensation to make it darker.
Flash compensation is possible in i-TTL, auto aperture flash, non-TTL auto flash
and distance-priority manual flash modes.
Press function button 2
to highlight the ash
compensation value.
Rotate the selector dial to set
desired ash compensation
value.
The compensation value can be set in
1/3 EV steps from +3.0 EV to 3.0 EV.
Press the [OK] button.
v Canceling ash compensation
To cancel, rotate the selector dial to return the compensation value to “0.”
Flash compensation cannot be canceled by simply turning the SB-910 off.
t For digital SLR cameras with a built-in ash featuring the ash
compensation function
The flash compensation can also be set on the digital SLR camera with a built-in
flash. For details, see the camera user’s manual.
If the flash is compensated on both the camera and the Speedlight, the flash
output is modified by the sum total of both compensation values. In this case, the
SB-910’s LCD panel shows only the compensation value set on the SB-910.